Monday, 20 September 2021
This week is #FireDoorSafetyWeek and we will highlighting a range of products including our range Intumescent products that have been extensively tested to British Standards, giving a great option in helping to protect property from fire hazards.
We stock a range of Intumescent & Acoustic products, from flipper and brush seals to intumescent hinge pads.
To comply with the latest UK Construction products directive, all fire doors should be fitted with hinges that are fire rated, which means they need to be CE marked. Ensure you comply with the latest UK Construction products directive, all fire doors should be fitted to manufacturer’s instructions.
Thursday, 26 August 2021
Extension to CE marked goods in the UK…
This week the Government has announced an extension to the date ending recognition of the CE Mark in England, Scotland and Wales, goods marked with CE marking will now continue to be placed in the market until 1st January 2023.
This extension means that many product sectors now have until 1st January 2023 to prepare to use the UKCA Mark, allowing an additional year to apply new product safety markings for most products. The UKCA Mark can be used now and is encouraged by businesses to start using it as soon as possible before it becomes mandatory.
Tuesday, 3 August 2021
To ensure you comply with the latest UK Construction products directive, all fire doors should be fitted with hinges that are fire rated, which means they need to be CE or UKCA marked.
To achieve FD30 or FD60 and comply with fire test evidence - 2 x 0.8mm hinge pads per hinge. One Intumescent hinge pad to be behind frame hinge leaf and one behind door hinge leaf.
(Specifically for 102x76x3mm Grade13 butt hinges, not all hinge types)
Fire doors are a critical barrier for the spread of fires, and it is essential that the correctly specified ironmongery & intumescent is fitted to comply with manufacturers instructions.
CALCULATING DOOR MASS.
Starting with the door weight, adjustments have to be made based on the following factors:
Wednesday, 16 June 2021
The popular Deco lever handle has a new family…
Introducing you to the New Radius Back Plate design with Deco Lever Handle.
We introduced you to the new design in the Welling catalogue at the beginning of this year, but we are pleased to inform you it is now in stock and available to order with next day delivery.
The Deco Lever Handle on Radius Back Plate is an appealing set of door handles that look great fitted within both contemporary and traditional settings...
Friday, 4 June 2021
Finding the Right Size Cylinder
You don’t need any special tricks or tools to accurately measure a cylinder size, you can do this simply with a metric ruler by taking the existing cylinder out of the door and measuring, this only takes a few moments and gives the most accurate measurement. Some are known to use there expert eye and measuring from the outside face of one backplate to the other but it is not something we would recommend for an accurate measurement.
Measuring from Existing Cylinder
Before you remove the cylinder for an accurate measurement, double check that the existing cylinder does not stick out significantly from the handle backplate. Ideally, it should sit flush or just slightly protruding, ideally no more than 5mm.
Many cylinders are held in place by a Fixing Bolt that is screwed from the door edge through a threaded hole on the side of the cylinder under the cam.